|
|
|
Handheld ultrasonic flowmeter
TDS-100H handheld ultrasonic flow meter is a battery-powered ultrasonic flow meter with the capability of a full-size flow meter. It is carefully designed for portability and ease of use.
Update:2008-08-21
 |
|
|
|
|
Portable ultrasonic flowmeter
TDS-100P is a portable ultrasonic flow meter,built-in printer,with high accuracy ,battery-powered, easy to use, etc.
Update:2008-08-21
|
|
|
|
|
Separate fixed ultrasonic flowmeter
TDS-100F is a fixed mounted ultrasonic flow meter,and can operate with all HIPEAK instruments transducer. Their electronic enclosures are rated as IP65 (NEMA 4X), thus, can be installed for both indoor and outdoor.
Update:2008-08-19
|
|
|
|
|
in line type ultrasonic flowmeter
The meter uses one high performance MSP430 series microprocessor made by Taxes Instruments,with high accuracy, wide range, low-cost, easy to use, no mechanical moving parts,etc.
Update:2008-08-20
|
|
|
|
|
Modular ultrasonic flowmeter
TDS-100M modular ultrasonic flow meter can work alone without a LCD and Keypad module, the module can be used alone as a flow meter. Users can even integrate a number of the modules into a multi-channel flow meter that can measures up to several dozen of different pipes or a flow meter that has higher accuracy by measures the same pipe with all the channels. The design of the meter is intended to provide for users like system integrators and OEM users with a lowest cost but of high performance flow meter.
Update:2008-08-19
|
|
|
|
|
Separate fixed ultrasonic heat meter
TDS-100RF is a fixed mounted ultrasonic heat meter.Their electronic enclosures are rated as IP65 (NEMA 4X), thus, can be installed for both indoor and outdoor.
Update:2008-08-27
|
|
|
|
|
in line type ultrasonic heat meter
The meter uses one high performance MSP430 series microprocessor made by Taxes Instruments. And can also add a pair of PT100 platinum resistance can be measured heat,with high accuracy, wide range, low-cost, easy to use, no mechanical moving parts,etc.
Update:2008-08-27
|
|
|
|
|
Module style ultrasonic heat meter
TDS-100M ultrasonic heat module can work alone without a LCD and Keypad module, the module can be used alone as a heat meter. Users can even integrate a number of the modules into a multi-channel flow meter that can measures up to several dozen of different pipes or a flow meter that has higher accuracy by measures the same pipe with all the channels. The design of the meter is intended to provide for users like system integrators and OEM users with a lowest cost but of high performance flow meter.
Update:2008-08-27
|
|
|
|
|
Insertion typeUltrasonic water meter
TDS-100W type ultrasonic water meter is a low-power industrial ultrasonic meter,with high accuracy,good stability, wide range,no moving part, do not set parameters, if choose the insertion type transducer can also install on line.
Update:2008-08-27
|
|
|
|
|
TDS-110 Ultrasonic Thickness Gauge
Ultrasonic Thickness Gauge measuring with ultrasonic wave, is applicable for measuring the thickness of any material in which ultrasonic wave can be transmitted and reflected back from the other face.
The gauge can provide quick and accurate measurement to various work pieces such as sheets of board and processing parts. Another important application of the gauge is to monitor various pipes and pressure vessels in production equipment, and monitor the thinning degree during using. It can be widely used in petroleum, chemical, metallurgy, shipping, aerospace, aviation and other fields.
Update:2010-05-07
|
|
|
|
|
clamp on type ultrasonic water meter
TDS-100W type ultrasonic water meter is a low-power industrial ultrasonic meter,with high accuracy,good stability, wide range,no moving part, do not set parameters, if choose the insertion type transducer can also install on line.
Update:2010-12-23
|
|
|
|
|
in line ultrasonic water meter(DN<=40mm)
TDS-100W type ultrasonic water meter is a low-power industrial ultrasonic meter,with high accuracy,good stability, wide range,no moving part, do not set parameters, if choose the insertion type transducer can also install on line.
Update:2010-12-23
|
|
|
|
|
TDS-2000 Ultrasonic Flaw Detector
Full digital intelligent ultrasonic flaw detector was launched out in 2009. It could diagnose defects in workpiece for various materials, such as steel, copper, aluminium, sintered carbide, casting, plexiglass, composite material, weld joint and so on. This is a portable and almighty flaw detector, which can effectively detect different kinds of defects (gas hole, crack, porosity, slag and lack of penetration, etc.). It is widely used in any field that need defect inspection and quality controlling refer to aerospace, military project, chemical industry, electric power engineering, metallurgical industry, railway transportation, auto, motorbike, safety inspection, construction industry and so on.
Update:2010-04-23
|
|
|
|
|
in line Ultrasonic water meter(TDS-100W)(DN>=50mm)
TDS-100W type ultrasonic water meter is a low-power industrial ultrasonic meter,with high accuracy,good stability, wide range,no moving part, do not set parameters, if choose the insertion type transducer can also install on line.
Update:2010-12-23
|
|
|
|
|
inline electro-magnetic flow meter
Measurement is not affected by the variation of flow density, viscosity, temperature, pressure and conductivity. High accuracy measurement is guaranteed according to the linear measurement principle.
No obstacle in the pipe, no pressure-loss and lower requirement for straight pipeline.
DN 6 to DN2000 covers a wide range of pipe size. A variety of liners and electrodes are available to satisfy different flow characteristic.
Programmable low frequency square wave field excitation, improving measurement stability and reducing power consumption.
Implementing 16 bits MCU, providing high integration and accuracy; Full-digital processing, high noise resistance and reliable measurement; Flow measurement range up to 1500:1.
High definition LCD display with backlight.
RS485 or RS232 interface supports digital communication.
Intelligent empty pipe detection and electrodes resistance measurement diagnosing empty pipe and electrodes contamination accurately.
SMD component and surface mount technology (SMT) are implemented to improve the reliability.
Update:2011-12-28
|
|
|
|
